There are some repair work that are easy to fix and some that are beyond all hope. I am going to cover the four most common issues and how you can take care of them yourself and save what is most likely among your kids favorite toys.
Inflatable water slides have ended up being extremely popular and if you are lucky adequate to own one you understand why. You have concerned the right location if you are trying to find details on how to repair an inflatable water slide. Banzai Falls takes place to be among the most acknowledged brands readily available and among the best selling. They also seem to be one of the most problematic slides too.
- Mold: Well summer season is here again which that very first hot day your kids are pleading for the water slide and you unload it from storage and find it is all musty. Mold is unpleasant and could be a possible health hazard however sometimes if it is not too extensive you can eliminate it. Start by getting a leaner that is safe for polyester canvas I would suggest Aurora Boat Clean Plus. You may want to think about washing your inflatable once a year to help keep is tidy.
- Tear or Pierce in the Fabric: No matter how mindful you are with your inflatable water slide a tear or puncture can occur. You may not discover it until you pump up the slide and notification that is under inflated or not pumping up at all. If this happens you must start to hunt for tear in the material.
Follow the instructions that include the set simply make certain you utilize a patch huge enough to cover the whole rip. If the patch materials are not big enough you can utilize more than one piece just make certain you overlap the joints by about 1 inch.
If your slide will not inflate at all the damage might be comprehensive enough that you can quickly find it. If your slide is only a little less inflated it most likely indicates that the tear is little and may be tough to find. A trick to make this easier is to pump up the slide and squirt it with a spray bottle filled with a mixture of meal soap and water. If you have a leakage the leaving air should cause the mix to bubble and you can identify the source of your issue. As soon as you find the leakage you may want to examine the remainder of the slide to ensure there is not more than one.
To repair a rip or tear in the fabric you begin by sewing up the hole this is to prevent it from getting bigger. When you have sewn it up you will need some adhesive and a piece of product for a patch. You can purchase a canvas repair set from practically anywhere that sells camping equipment they must have them for fixing camping tents.
- Dividing Seams: Regrettably if your slide is splitting up at the joints you have the hardest kind of repair to make. Most of the time this type of damage might be too comprehensive to repair however since these slides are expensive you most likely wish to provide it a shot. You are going to follow the same actions as fixing a hole.
Start by sewing the joint up, make sure to go a little beyond where the split stops. Check replacing vinyl siding company as well. After that is done you are going to cover with the spot material. Cross your fingers and turn the blower on if the slide holds air then give yourself a pat on the back.
- A Defective or Broken Blower: If the blower system is bad unless you have experience with electrical motor repairs then you ought to truly replace it. You can acquire replacement blowers on eBay for anywhere from $50 – $200 depending on the type and condition. You will need to match the blower size and strength to the one you have for it to function properly.
Banzai Falls is not the only maker of inflatable water slides there are other brand names like Blast Zone and Bounceland which in my viewpoint provide a higher quality item. Banzai appears to have a great deal of trouble with toughness which leads a lot of people searching for directions on how to them. I hope you are able to fix your slide but if not take a look at a few of the other brand names.